Home>Topics>>The Rope Stretch

# The Rope Stretch

Mon, 16 May 2011|

Ray McCormack discusses and demonstrates how to use a rope to stretch a hoseline into a building.

+

Transcript

[BLANK_AUDIO] [MUSIC] [SOUND] Hi I'm Ray McCormack, welcome to training minutes. in this segment we're gonna talk about the rope stretch. The rope stretch could be one of your fastest stretches and it will definitely cut down on the amount of hose you use to get to the fire area. One of the things you need is a rope bag. Now I could either drop this rope to the ground or play it out by hand from the bag itself. Playing it out by hand makes sure that if there is an entanglement in this bag, I can fix the problem from here. If I throw the bag and there's an entanglement, I'll have to pull up the bag. From wherever it lands and start over again. [MUSIC] [MUSIC] [MUSIC] You're good [MUSIC] >> When performing a rope stretch, it's critical that you being in enough dry hose to finish your stretch. If the stretch is to the floor above in this case, we would need three lengths brought in through this window. Once we have the correct amount of hose into the occupancy on the floor below, we can charge the line with water. Prior to that, you'll be encumbered by lifting a hose that's wet already. In this scenario, we pulled three links of hose through the window. That's enough hose to get us to the floor above. ...One for this occupancy, one for the staircase, and one for the fire occupancy above. That's our minimum amount of hose we want to pull in the window. Now if fire should go to the next floor above that, to the top floor, if we had brought in one more length, four, it would have been enough to get to that as well... A rope stretch can be the fastest stretch you undertake, or your worst nightmare. Make sure you're all set up to go. Bring in the correct amount of hose through the window. Make sure you have enough to get to where you want to go, and a little extra never hurts. I'm Ray McCormick, this has been Training Minutes.