Home>Topics>>RIT Face Piece Emergency

RIT Face Piece Emergency

Fri, 4 May 2012|

Nick Martin demonstrates methods for putting an emergency face piece on a down firefighter who has lost his mask. Sponsored by Globe.

+

Transcript

[MUSIC] [MUSIC] Hi, welcome to fire engineering's training minutes, thanks to our sponsor, Globe Turnout Gear. I'm Nick Martin and today we're gonna talk about some writ related emergencies and putting a face piece on a downed firefighter. Putting a face piece on a downed firefighter whose mask has come off either accidentally or intentionally. Is one of the most technically challenging skills and obviously it'll be performed under some of the most arduous and challenging conditions, rescuing one of our own brother firefighters. So it's important that we have practice in this skill and that we have multiple options available to us. So in this scenario here, we've already we've located our downed firefighter. I have my writ SCVA with me and we're gonna go ahead and get in position and identify and solve the problem. So my first step is gonna be to approach the firefighter from the shoulders here, I'm gonna grab his shoulder and I'm gonna bring him up into our rescue position. which is accomplished by bringing him into an exaggerated sitting position. Coming up behind him, I can kinda use my knee to support him a little bit. And in this case I'm gonna, once I have him like that, I'm gonna let him come back a little bit. And that's gonna let his head kinda naturally flap around as I, as I need to. One of the first things I want to assess. In assessing an unconscious downed firefighter is does he have a face piece on. Because if he doesn't have a face piece on, there's no way any other air is going to get to him and obviously protecting his respiratory track is our most important priority as we prepare to get him out. So, by simply taking a gloved hand and touching his face, I can tell the difference between a mask, a mask on his face and raw face. I know that he doesn't have his mask on. Now obviously, his mask here is laying at his side. I don't know what happened to him, I have to assume that he made an intelligent decision to take that mask off, whether it had a malfunction, either way, I can't count on this mask, so I'm not gonna use it. If, if you were to encounter a downed firefighter and not have a red SCBA and you have no other option. Putting his own mask back on him may be better than doing nothing, but in a scenario where you have a functional rid scva that you know is working well, that's going to be what we want to go with. So, I'm going to prepare him by kind of opening up his collar, and getting a little bit of an area here so I can access the bottom of his chin. I have my rid scva behind me, I'm going to turn that on. I can grab my rip mask. With my mask in one hand, you can see this mask here was stored in one of our first options, all right? Our first option is to place our mask on him using the, what many of us use to put our own face piece on. Basically by having the netting stored over the front of the mask and pulling that back over. So, a lot of guys want to come in and just go right to putting that on the fire fighter's mask, but, on his face, but we have to realize that he might have a poor respiratory effort and he might not even have enough of a breath to take that initial pull to trip the positive pressure SCBA. So we need to get air flowing to the SCBA somehow. We don't just wanna simply the purge valve on, because if I turn the purge valve on, that's not gonna tell me anything about whether or not I have a seal on him. What I wanna do is get mask, is get the air flowing as if I had taken a breath. Now obviously I have my own FCBA mask on so I can't take a breath, so with the Scott FCBA's I have two options. Number one is I can take a gloved hand and just give this a little bit of a smack right where it says Scott. That'll get it flowing or a little bit more gentle method I can just take my thumb and my forefinger and press there and get it flowing. But by getting that flowing what that's gonna allow me to do is know if I get a feel. So as I, as I have my air flowing, I'm gonna feel with one hand for his chin. [NOISE] Come up underneath his chin. And roll the mask on his face. And we can here there by the stopping of the free rush of air, that I have a seal on his face. Right, if I don't have a seal I can adjust as necessary, then with my other hand I'm gonna grab my netting and run it all the way down the back of his head, pushing all the way until it's at the bottom of his neck. Alright, keeping my pressure on the front to maintain that seal, I come along one side, grab my bottom strap, hold it with my other hand. Come around my other side. Grab my bottom strap. Our bottom straps are gonna give us about 80% of our seal. I got a little bit of a leak there, so now I can come along my top straps. And snug those up as necessary. One thing you can do with your writ pack's SCBA to make it a little more combat ready is to already have some large rings on these straps here so that they're more easy to find with a gloved hand. It's important to do this from this position because you're oriented as a downed firefighter is oriented. A lot of guys try to do this. From the front of the firefighter and then your left is his right and vice-versa and it gets confusing. Here I can, I'm oriented as the downed firefighter is and I can maintain good control of this guy and put him in whatever position I need to. So that's one option for putting a mask on. I'll let Curtis take his mask off here and I'll show you another option. A lot of times the initial pulling the netting over doesn't work. If you don't get that netting all the way down to the back of his neck, if it's still sitting at the top of his head, it's difficult to maintain a seal. So in some previous training we've seen a lot of guys who, they kinda don't know where to go after that. They don't really know how to recover from that, and a lot of em try to spend time. putting the netting back over the front of the mask, kind of like I would try to be doing now, and you could imaging how well that actually works inside of a fire building when you have one of your downed brother firefighters right in front of you. So if that initial attempt fails in getting that netting over and now I have my netting like this, another option I can do is put my mask on with the netting over the back here. So what I'm going to do is get my flow of air going again. I'm going to encircle my thumb and forefinger on the bottom there. Let my firefighter's head rest in front of me, and I'm just going to come up to this chest. And as I come up his chest, I run my fingers along the straps, around his back to the bottom of his neck. Grab my straps, snug. Snug, and we're on. It's not pretty, it's not comfortable, but I now have a mask on him, and I'm protecting his respiratory effort. I'll let Kurtis take that off of him. The important thing that we do here is that we have multiple methods to control this firefighter's face piece and get it back on him in the event that he doesn't it on him when we find him. If our exit is not immediately available to us, the first thing we have to accomplish as the [UNKNOWN] team, is make sure that the down firefighter has air on his face to protect his respiratory system. If we don't do that, his likelihood of recovery is very slim. So it's something we need to practice, something we need to practice in low visibility, requires a lot of dexterity. And it requires that you have a couple methods available to you, so that if plan a doesn't work you roll right into plan b seamlessly. Thanks for watching Fire Engineering's Training Minutes, and thank you to our sponsor, Globe Turnout Gear. We'll see you next time. [MUSIC]

Related Videos:

  1. Multiple Firefighter Emergency Egress

    Dan DiRenzo and his crew demonstrate how to use a tool as an anchor point for firefighter personal-escape systems when multiple firefighters need to escape from an upper floor. Sponsored by Sterling Rope.

  2. Packaging a Down Firefighter

    Nick Martin shares a systematic method for packaging a down firefighter for removal. Sponsored by Globe.

  3. FDIC 2012: Courage and Valor Award

    Chicago (IL) Firefighter Larry McCormack was the recipient of the 2012 Ray Downey Courage and Valor Award.