Firefighters bravely put themselves at the forefront of danger to protect their neighbors and community. While proper flame resistant (FR) attire and equipment are readily available for fire protection, it’s important to note that safety precautions should continue once the fire is extinguished and even after coming back to the station. Along with personal protective equipment (PPE) and air-purifying respiratory units, there are important safety measures which will help prevent firefighters encountering carcinogens after the fire has been extinguished. Partnering with Fire Engineering and Firefighter Cancer Support, Milliken ResQ sponsored a Firefighter Cancer Prevention and Reduction webinar detailing valuable tips for reducing firefighters’ exposure to carcinogenic hazards and creating the safest possible environment for them. Below are some key takeaways from this webinar.
Firefighters are exposed to a range of harmful chemical hazards, like carcinogens, when on the job. Decontaminating turnout gear after fighting a fire can help reduce continued exposure. Clothing and gear should be decontaminated at the scene of the fire before leaving the site. Everything that encountered potential carcinogens must be rinsed and scrubbed with a soap and water mixture before removal. Once all gear and PPE have been scrubbed down, proper storage is essential to help keep carcinogens at bay. Avoiding skin contact with any materials that may be affected and placing gloves, coat, bunker gear pants, boots and helmet in a bag and securing with tape will help prevent further contamination. PPE must then be properly washed per specific care instructions before being used or handled again. Once their PPE is removed, the firefighter should shower within one hour to help prevent carcinogens entering through the skin. Thoroughly wiping down skin with a wet wipe is an alternative option if a shower is not possible.
Keeping the truck cab uncontaminated is equally as important as cleaning PPE, gear and skin. Store potentially contaminated PPE and equipment out of the cab and in designated, controlled areas to help greatly reduce the risk of encountering potentially hazardous carcinogens for all who enter the truck.
Finally, distinguishing red, yellow and green zones in the firehouse is instrumental in helping reduce potential health risks. The red or hot zones are areas of the station that are exposed to carcinogens and include the truck bay areas and contaminated PPE and gear areas. These areas must be properly ventilated to further ensure safety throughout the station. The yellow or transition zones allow movement between the red and green zones and are hallways and doors leading into the station house. The green or cold zones contain living, working, eating and sleeping areas where no known hazards should be present. Having clearly defined spaces throughout the station will help reduce further contamination of potential health risks.
Adapting to new policies and being aware of potential risks can help greatly improve quality of life for firefighters and their families in the long run. Carcinogens are a big concern for firefighters, however, the right steps and policies can help put firefighters at ease.
Milliken ResQ is committed to protecting those who protect us though trusted primary and secondary FR fabrics which meet a range of NFPA standards for first responders.
To learn more about our industry-leading fabric offerings for first responders, visit our website at resq.milliken.com, and follow us on Facebook and Twitter for the latest in first responder, FR, PPE and safety trends.
The information in this publication is based on testing conducted by or conducted on behalf Milliken & Company, and represents our analysis of the test results. It is not intended to substitute for any testing that may be unique and necessary for your facility for you to determine the suitability of our products for your particular purpose. Since we cannot anticipate all variations in enduser conditions, Milliken & Company makes no warranties and assumes no liability whatsoever in connection with any use of this information. As each customer’s use of our product may be different, information we provide, including without limitation, recommendations, test results, samples, care/labeling/processing instructions or marketing advice, is provided in good faith but without warranty and without accepting any responsibility/ liability. Any test results reported are based on standard laboratory testing but should not be used to predict performance in actual fire situations. Each customer must test and be responsible for their own specific use, further processing, labeling, marketing, etc. All sales are exclusively subject to our standard terms of sale posted at www.milliken.com/terms (all additional/ different terms are rejected) unless explicitly agreed otherwise in a signed writing. Use caution near sources of flame or intense heat, and do not launder with bleach or fabric softeners.
No matter what call comes in – Milliken ResQ™ has your back. A result of Milliken’s industry-leading technologies paired with the brightest minds in textile research, ResQ™ flame resistant (FR) fabrics help protect you and your team in a range of harmful and life-threatening situations, including the immediate threat of fire. As long‑time manufacturers of high-performance military fabrics made right here in the U.S., and as the first-ever America’s Safest Company Hall of Fame honoree, we understand what it takes to feel safe no matter what may come your way.
Discover how Milliken ResQ™ can enhance your current fire service program today by visiting ResQ.Milliken.com