By Ted Nee
Simulations are a great tool for developing decision-making skills. They are especially effective training for “soft” skills. Soft skills are often referred to as the three Rs: Reading, Recognizing and Reacting. Reading is seeing the critical cues at an incident, things like building construction, fire dynamics, and rescue profile. Recognizing is seeing a pattern based on the critical cues observed. Finally, reacting is choosing a course of action that is likely to affect the outcome of the incident based on your prior experience with similar events. Naturalistic decision-making researcher Gary Klein describes this process as recognition primed decision making or RPMD. In order to develop these “soft skills” it is necessary to gain experience in a wide variety of incident situations. Training with incident simulations is one way to accomplish this goal.
In this restaurant fire simulation, you are the Engine 1 officer and will be first due at the incident. You are in quarters when the following dispatch comes in: “Engine 1, Engine 2, Engine 3, Ladder 1, and Battalion 1, respond to 3403 Central Avenue. We have a report of a structure fire at the Il Vicino restaurant.”
The building housing the Il Vicino restaurant of older, ordinary construction. The bearing walls are of masonry construction with wooden floor and roof assembly consisting of dimensional old growth lumber. The building abuts other ordinary construction occupancies but is not interconnected and there is no access from Sides B and D. The building has housed various businesses over the years and is now a wood-fired pizza restaurant.
In this simulation, it is critical to do a 360 size-up since from Side A. The structure appears to be a single-story strip mall with smoke showing from Side C. Information gathered from a recon of Side C should drive your tactical decision making.
Start the restaurant fire simulation video. You will be prompted to pause the video and give a radio report at several key points.
The first radio transmission you will provide is a standard size-up report. This radio report should include the following elements:
- Arrival on scene
- Building area/size
- Building height (number of stories)
- Problem description
- Action being taken (assignments for the E-1 crew)
- Assume and name command
- Any resource needs
At the next place, you are asked to pause the video you are prompted to give a follow-up report. This report should include:
- Presence or absence of a basement
- The number of stories from Side C if different from initial size-up
- Any immediate life safety or rescue needs
- Incident problems or location if different from the initial size-up
You will be prompted to pause the video and make an assignment when additional units report on scene. Practice giving assignments using the Task, Location, Objective (TLO) format. An example assignment might be: “Ladder 1 pull a second handline from Engine 1, (Task) go to the first floor (Location), get an “all clear,” and check for fire extension.” (Objective)
When Battalion 1 arrives on scene, make a command transfer using your department’s standard command transfer process (if applicable).
Formulate Conditions, Actions, Needs (C.A.N.) reports for the assigned units based on the visible conditions and information provide when prompted to do so.
Finally, have Battalion 1 give an assignment to Engine 3 using the TLO format based on the C.A.N. reports from the assigned units.
The most effective way to use the simulation is to get feedback regarding your performance (have an experienced officer or colleague critique your radio reports) and run through the simulation again, incorporating the feedback.
More fire training simulations: http://www.fireengineering.com/training/fire-simulations.html
Ted Nee is a 34-year veteran of the fire and emergency services. He joined the Albuquerque (NM) Fire Department (AFD) in 1983. He retired from the AFD at the rank of deputy chief. After his service with the AFD Ted served as the lead command instructor and command training center coordinator for the Emergency Response Organization at Sandia National Labs in Albuquerque for nine years. Ted is a Blue Card Command type IV and V Incident Commander and a Blue Card Command Instructor. Ted is currently teaching Fire Studio 6 Essentials and Advance Simulation Concepts workshops across North America. Ted is the co-author of the Fire Engineering DVD “Fire Dynamics” along with Dan Madrzykowski of the Underwriters Laboratories Firefighter Safety Institute and Lieutenant John Ceriello of the Fire Department of New York.